Page 1 of 1

Interference Between Wigle and WLAN Access …

Posted: Sun Aug 11, 2019 1:07 pm
by carlos62
Hello … i have a nasty Problem.
I Run Wigle automatically in the Background with a Boot Start.
With my new Backview 9500 Pro and Android 8.1 i have some serious Trouble to Run Internet + OpenVPN3 over WLAN.
I has nearly no Performance … Internet Radio does also not work.
Every Scan triggers a reconnect to the Openvpn.
So even with 1 scan per minute performance is rarely low … on faster lower and then impossible.

To Avoid this Nasty side Effect i suggest to do one the following Options:
- Implement "GPS No-scan Areas" by Coordinates and Radius
- Implement "No-scan Area while in the configuration of the Device known WLANs are in Range"
- Implement "No-scan Area while nominated WLANs in Range"
- Implement "No scan" while there is no GPS Movement ... also usefully to preserve Batteries in general.

Also i have some Trouble to use my Hotspot Function on the Device, so i suggest additional some Function like "No-Scan while Hotspot ist Active / Connected

Re: Interference Between Wigle and WLAN Access …

Posted: Tue Aug 13, 2019 6:22 pm
by arkasha
Great idea!

Please note that you can implement this with a broadcast intent service like Taker using the SCAN and PAUSE intents in the meantime!


Documents the intents ... m&hl=en_US

Is an example broadcast intent